Wiki » History » Version 9
Luiz Fernando Lavado Villa, 2019-02-28 13:56
| 1 | 1 | Luiz Fernando Lavado Villa | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | {{>toc}} |
||
| 4 | |||
| 5 | 7 | Luiz Fernando Lavado Villa | The single-phase project is an open-source power electronics technological suit consisting of a hardware, a firmware and a software parts. |
| 6 | These parts are used together, and their specifications are interdependent. |
||
| 7 | For the sake of simplicity, each part will be presented independently in this wiki. |
||
| 8 | 1 | Luiz Fernando Lavado Villa | |
| 9 | h2. Hardware |
||
| 10 | |||
| 11 | 7 | Luiz Fernando Lavado Villa | The hardware of the single-phase project consist of a 10cm by 10cm board which hosts five different blocks of electronics components. |
| 12 | Details on each block, their sizing and interconnections is given in the link below. |
||
| 13 | 1 | Luiz Fernando Lavado Villa | |
| 14 | 8 | Luiz Fernando Lavado Villa | |
| 15 | 9 | Luiz Fernando Lavado Villa | * [[Hardware|Hardware page]] |
| 16 | 7 | Luiz Fernando Lavado Villa | |
| 17 | 1 | Luiz Fernando Lavado Villa | h2. Firmware |
| 18 | |||
| 19 | 7 | Luiz Fernando Lavado Villa | The firmware of the single-phase project consists of a scheduler program coded in C and compatible with a ATMEL Mega328P micro-controller. |
| 20 | The program can be uploaded onto its micro-controller through a dedicated makefile, which is also provided. |
||
| 21 | Details of the program are given in the link below. |
||
| 22 | |||
| 23 | * [[Firmware]] |
||
| 24 | |||
| 25 | |||
| 26 | 1 | Luiz Fernando Lavado Villa | h2. Software |
| 27 | 7 | Luiz Fernando Lavado Villa | |
| 28 | The Software of the single-phase project consists of a human-machine interface coded in Python and compatible with Linux. |
||
| 29 | It can communicate with the Firmware through a communication protocol via an USB connection. |
||
| 30 | Details of the Software are given in the link below. |
||
| 31 | |||
| 32 | * [[Software]] |