Xilink Vivado¶

installation Windows¶

Vivado 2022.2¶

Windows 64-bit: Run the settings64.bat from the Vivado/<version> directory

On Windows, click Start > All Programs > Xilinx Design Tools > Vivado 2022.2 > Vivado 2022.2 Tcl Shell to launch the Vivado Design Suite Tcl shell.

dir D:\Public\RedPitaya-FPGA
vivado -source red_pitaya_vivado_project_Z10.tcl -tclargs v0.94

We recommend Vivado 2020.1

Vivado 2020.1¶

Création d'un nouveau projet¶

Clone the repositiry

Create a new project with Vivado.

Select the device xc7z010clg400-1

Add the constraint redpitaya.xdc and verilog counter.v files from the repository.

Create a new Block Design according to the following instructions to creat a block diagram similar to Fig. 1.Binary_Counter.

Add the IP called ZYNQ7 Processing System from the menu and Run Block Automation with default options.

Add Module counter.v from the menu.

clic doit

Add a Binary Counter from thr Add IP menu.

Add a port called led_o with components from 7 down to 0.

connect

From the menu click on Validate Design

In 'Sources' go to 'IP Sources' right-click on 'project1' and select 'Create HDL Wraper'

Proceed to run Synthesis, Implementation and Bitstream Generation

Find the bitstream file (you may use the command 'find . -name *bit')

Transfer the bitstream file (*.bit) to the Red Pitaya (you may use *sftp root@rp-ip and put *.bit)

clic doit

Tcl Console

cd d:/Public/RedPitaya-FPGA/prj/Examples/Led_blink
source D:/Public/RedPitaya-FPGA/prj/Examples/Led_blink/make_project.tcl

pour éviter cette erreur copier le dossier core dans ../tmp/

cores.zip

Bitstream¶

le fichier bitstream doit être remplacer le fichier /dev/xdevcfg

tuto Web¶

https://github.com/lvillasen/RedPitaya-Hello-World

https://redpitaya.readthedocs.io/en/latest/developerGuide/software/build/fpga/fpga.html

https://antonpotocnik.com/?p=487360