Actions
Hardware » History » Revision 5
« Previous |
Revision 5/15
(diff)
| Next »
Luiz Fernando Lavado Villa, 2019-02-28 14:05
Hardware¶
The hardware of the single-phase project consists of a 10cm by 10cm printed circuit board that hosts 5 electronics blocks.
These blocks all fulfill functions which are necessary to the proper operation of any power electronics converter.
Figure 1 illustrates these blocks.
Each block is explained in detail in the sections below.
Power Block¶
The Power Block is the part that manages input/output power within the board.
It consists of a single inverter leg, as illustrated in the figure below.
Measurement Block¶
Control Block¶
Driver Block¶
Feeder Block¶
Updated by Luiz Fernando Lavado Villa about 5 years ago · 5 revisions