Wiki » History » Revision 11
Revision 10 (Luiz Fernando Lavado Villa, 2019-02-28 13:56) → Revision 11/14 (Luiz Fernando Lavado Villa, 2019-02-28 14:00)
h1. Wiki
{{>toc}}
The single-phase project is an open-source power electronics technological suit consisting of a hardware, a firmware and a software parts.
These parts are used together, and their specifications are interdependent.
-> put an image of the hardware/firmware/software abstraction here
For the sake of simplicity, each part will be presented independently in this wiki.
h2. Hardware
The hardware of the single-phase project consist of a 10cm by 10cm board which hosts five different blocks of electronics components.
Details on each block, their sizing and interconnections is given in the link below.
* [[Hardware|Hardware page]]
h2. Firmware
The firmware of the single-phase project consists of a scheduler program coded in C and compatible with a ATMEL Mega328P micro-controller.
The program can be uploaded onto its micro-controller through a dedicated makefile, which is also provided.
Details of the program are given in the link below.
* [[Firmware|Firmware page]]
h2. Software
The Software of the single-phase project consists of a human-machine interface coded in Python and compatible with Linux.
It can communicate with the Firmware through a communication protocol via an USB connection.
Details of the Software are given in the link below.
* [[Software|Software page]]