Visual and Physical Control Architecture for Flying End-Effector

h1. Perceptive and torque-control NMPC wiki

h2. Prerequisite

The framework has been written and tested using *Ubuntu 18.04*, since it is the OS used by the LAAS-CNRS robotic platform. It should work seamlessly on a recent Linux version, but there is no guarantee.

The installation on a non-Linux OS has to be handled by the user.

>

The installation assumes the use of a package manager (e.g. @apt@) to install some dependencies, as well as the Gazebo simulator. Everything provided in this repo or by the LAAS-CNRS robotic platform aims to be installed locally in the repository folder to avoid polluting the user's system.

>

h2. I - Software Overview

h3. I.1. Openrobots

Collections of all the open-source software used at LAAS. You can find more details in "Openrobots Wiki-Homepage":https://www.openrobots.org/wiki

>

h3. I-2. Robotpkg

"Robotpkg":http://robotpkg.openrobots.org/ is a packaging system for installing robotics software developed by the robotic community.

We will use robotpkg to install the required modules for the simulations (state estimation, gazebo interface...) as well as third-party dependencies (qpOases).

>

h3. I-3. GenoM

GenoM is a generator of modules, designed to be middleware independant, i.e. the same module can be compiled for, e.g., ROS, YARP, or Pocolibs, without any modification.

This allows a great code re-usability and to abstract the user from any specific choice of a middleware.

Originally GenoM has been developed tightly with Pocolibs, then from version 3, aka GenoM3, ROS templates has been provided.

>

Another specificity of GenoM is the interaction with and between components.

Each component is started independantly like a linux executable (within a roscore, for ROS, or a h2 intance, for Pocolibs), then the connection between ports (or topics) is made using a supervisor, "Genomix":https://git.openrobots.org/projects/genomix, either with "Matlab":https://git.openrobots.org/projects/matlab-genomix or "TCL":https://git.openrobots.org/projects/tcl-genomix. 

>

h3. I-4. Pocolibs

"Pocolibs":https://www.openrobots.org/wiki/pocolibs/ is a middleware, like ROS.

It aims at being lighter and faster than ROS, when running on a single machine, thanks to the exploitation of shared memory. ROS, on the other hand, uses a network layer for sending messages between nodes, this leads to greater delays and loss of performances.

>

h3. I-5. TeleKyb

The "TeleKyb":https://git.openrobots.org/projects/telekyb3 software platform provides the aerial-robotic oriented softwares developped at LAAS-CNRS.

In particular, we will use:

* "mrsim":https://git.openrobots.org/projects/mrsim-genom3, a Multi-Robot SIMulator. It is design to be a transparent interface w.r.t. the real aerial vehicles used in LAAS-CNRS. It makes the transition between simulation and experiment transparent, from the software point of view.

* "pom":https://git.openrobots.org/projects/pom-genom3, a UKF-based state estimator merging state feedback for different sources (e.g. mocap + IMU)

* "optitrack":https://git.openrobots.org/projects/optitrack-genom3,, to export the motion capture data to the genom software stack

* "rotorcraft":https://git.openrobots.org/projects/rotorcraft-genom3, the low-level interface, with either the simulated or real platform

* "nhfc":https://git.openrobots.org/projects/nhfc-genom3, near-hovering flight controller, used for unmodeled take-off and post-failure recoverues

* "maneuver":https://git.openrobots.org/projects/maneuver-genom3, a global trajectory planner, providing position and attitude (as quaternions) as well as first and second derivatives. It implement take-off and waypoint-to-waypoint motions. A joystick-based velocity control is implemented, but not used in this project.

>

h3. I-6. Gazebo

To simulate the platform, we use the "Gazebo":http://gazebosim.org/ simulator. To interface it with the genom software stack, we use two dedicated components:

* "mrsim-gazebo":https://git.openrobots.org/projects/mrsim-gazebo a plugin to interface the simulated multi-rotor with the genom components (in place of mrsim)

* "optitrack-gazebo":https://git.openrobots.org/projects/optitrack-gazebo emulates the optitrack network interface to publish the model poses

>

The installation procedure for Gazebo can be found at http://www.gazebosim.org/tutorials?cat=install&tut=install_ubuntu&ver=9.0

h2. II - Installation procedure

This section is a tutorial on how to install the software architecture to run the simulations.

>

h3. II-0. Clone the Visual and Physical Control Architecture for Flying End-Effector repository

Clone the repo associated to this project, using the git daemon. Its root will act as the devel folder for the following.

<pre><code class="shell">

git git://redmine.laas.fr/laas/visual-physical-control-architecture.git

cd ./visual-physical-control-architecture/

</code></pre>

>

To simplify the installation, we provide some environment variables in the @env.sh@ file.

In order to run all the installed executables, we need to setup the path to the newly created folders.

We provide a @env.sh@ script that exports all the required variables.

*/!\* the source has to be called in the repository root since it uses the @pwd@ command to export the paths.

<pre><code class="shell">

source env.sh

</code></pre>

>

h3. II-1. Setup robotpkg

(Steps taken from http://robotpkg.openrobots.org/install.html)

h4. 1. Clone the robotpkg lastest release:

<pre><code class="shell">

git clone git://git.openrobots.org/robots/robotpkg

</code></pre>

h4. 2. Check that the @openrobots/@ folder exists in the repository root, and update the environement variables accordingly if you didn't source the @env.sh@ file:

<pre><code class="shell">

export ROBOTPKG_BASE=`pwd`/openrobots

</code></pre>

h4. 3. Install robotpkg

<pre><code class="shell">

cd robotpkg/bootstrap

./bootstrap --prefix=$ROBOTPKG_BASE

</code></pre>

h4. 4. Install the required components and their dependencies

The installation can be done 'manually' by navigating to the desired folder in @./robotpkg/@ and install with @make update@; but we will simplify the process using a _set_.

To do so, we need to edit the config file: @$ROBOTPKG_BASE/etc/robotpkg.conf@. Add the following at the end of the file:

<pre><code class="shell">

PKG_OPTIONS.%-genom3 = \

        codels \

        pocolibs-server \

        pocolibs-client-c

PKGSET.mpcset = \

    sysutils/arduio-genom3 \

    architecture/genom3 \

    architecture/genom3-pocolibs \

    robots/rotorcraft-genom3 \

    localization/pom-genom3 \

    localization/optitrack-genom3 \

    motion/nhfc-genom3 \

    path/libkdtp \

    optimization/qpoases \

    net/genomix \

    supervision/matlab-genomix \

    supervision/tcl-genomix \

    shell/eltclsh \

    simulation/mrsim-genom3 \

    simulation/mrsim-gazebo \

    simulation/libmrsim \

    simulation/optitrack-gazebo

PREFER.lapack = robotpkg

PREFIX.matlab = <path/to/Matlab>

</code></pre>

The last line need to point to the Matlab root folder in the system (e.g. @/opt/Matlab@).

It is recommanded to use Matlab for the proposed simulations since the syntax is more intuitive and comprehensible for the user to modify them. However, we also provide all the launch files in tcl, as well as the environment to run them (@shell/eltclsh@ in the above list is a custom tcl script shell).

If Matlab is not installed on the system, remove the lines @supervision/matlab-genomix \@ and @PREFIX.matlab = <path/to/Matlab>@ from the above list.

Also, all the above is meant for using Pocolibs, not ROS. Futur version of this tutorial might come to use the ROS install.

>

Now return to the robotpkg folder and install all the set:

<pre><code class="shell">

cd robotpkg

make update-mpcset

</code></pre>

>

During the installation, some required dependencies need to be install with the usual package manager (e.g. @apt@ on Ubuntu). When the install stops, install the required packages and rerun the above command.

>

h3. II-2. Install custom components

h4. List of the components

The @src/@ folder contains some additional components, in particular:

* *vision-idl*: the type declaration regarding the camera modules

* *camgazebo-genom3*: read the data from the gazebo inate cameras, via the gazebo API

* *camviz-genom3*: record and/or display the images from a camera

* *arucotag-genom3*: detect and filter (EKF-based) the ArUco markers/tags

* *maneuver-genom3*: custom version of maneuver (already mentionned) that publishes the reference trajectory for a specified receding horizon

* *uavmpc-genom3*: the NMPC controller presented in the paper

h4. Install the extra components

Since it they are not considered 'stable' as the one provided in robotpkg, we rather install them in a devel folder.

Go to the project root, check that the devel folder exists, export the path if you didn't source the @env.sh@. Then go to the sources folder:

<pre><code class="shell">

export DEVEL_BASE=`pwd`/devel

cd src/

</code></pre>

>

For the manual installation, @asciidoctor@ is needed. It can be installed using @apt@ or any package manager.

Each component here has to be installed manually, using @autoconf@. To do so, proceed as follow:

<pre><code class="shell">

cd src/<component>/

./bootstrap.sh

mkdir build

cd build

../configure --prefix=$DEVEL_BASE --with-templates=pocolibs/client/c,pocolibs/server

make install

</code></pre>

>

The component @vision-idl@ has to be installed first since it defines some type headers used by others.

The installation of the main component, @uavmpc-genom3@, is described in the next subection.

>

h3. II-3. Setup the environment

In order to run all the installed executables, we need to setup the path to the newly created folders.

All the required variables are exported in the @env.sh@ file.

h2. III - Running the simulation

*The part is going to be filled soon.*