Hardware » History » Version 5
Luiz Fernando Lavado Villa, 2019-02-28 14:05
| 1 | 1 | Luiz Fernando Lavado Villa | h1. Hardware |
|---|---|---|---|
| 2 | 2 | Luiz Fernando Lavado Villa | |
| 3 | 4 | Luiz Fernando Lavado Villa | {{>toc}} |
| 4 | |||
| 5 | 2 | Luiz Fernando Lavado Villa | The hardware of the single-phase project consists of a 10cm by 10cm printed circuit board that hosts 5 electronics blocks. |
| 6 | 3 | Luiz Fernando Lavado Villa | These blocks all fulfill functions which are necessary to the proper operation of any power electronics converter. |
| 7 | Figure 1 illustrates these blocks. |
||
| 8 | 1 | Luiz Fernando Lavado Villa | |
| 9 | 4 | Luiz Fernando Lavado Villa | p=. {{thumbnail(theory_power_converter_1.png, size=350, title=Theoretical view of a power electronics converter)}} |
| 10 | 1 | Luiz Fernando Lavado Villa | |
| 11 | 4 | Luiz Fernando Lavado Villa | Each block is explained in detail in the sections below. |
| 12 | 1 | Luiz Fernando Lavado Villa | |
| 13 | 4 | Luiz Fernando Lavado Villa | h2. Power Block |
| 14 | |||
| 15 | 5 | Luiz Fernando Lavado Villa | The Power Block is the part that manages input/output power within the board. |
| 16 | It consists of a single inverter leg, as illustrated in the figure below. |
||
| 17 | |||
| 18 | |||
| 19 | p=. {{thumbnail(single_phase_topology.png, size=350, title=The power topology of the single-phase board)}} |
||
| 20 | |||
| 21 | |||
| 22 | |||
| 23 | |||
| 24 | 4 | Luiz Fernando Lavado Villa | h2. Measurement Block |
| 25 | |||
| 26 | h2. Control Block |
||
| 27 | |||
| 28 | h2. Driver Block |
||
| 29 | |||
| 30 | h2. Feeder Block |